Maxamp 20

249,00DKK

Description from Maxamp NL MaxAmp 12V Class – D amplifier is a new amplifier developed, manufactured and tested by AccuSafe . This new amplifier is designed to be especially robust and is ideal in a boomcase, boombox, boominator or any other audio project. The efficient Class-D chip is able to deliver up to 22.5W power per channel at 14V and with a maximum efficiency of 93 % , you will get the most out of your audioproject! MaxAmp includes the following protections: – Short-circuit protection on speaker output – Reverse polarity protection on the power input – Temperature protection This Maxamp with JST-PH connector is suitable for when the amplifier is integrated in your build. You can use the included cable to connect the signal on the outside of your boomcase, boombox or boominator. We recommend to use a 3.5mm jack socket which needs to be soldered on the JST-PH cable and to mount it in a panel that’s on the outside of your project. This way your signal input will always externaly be available. This 3.5mm socket connector is the same as the ones you will find on MP3 player or phone and is very easy to use. You are able to order an 3.5mm socket soldered on cable JST from us or just create one by yourself! How it’s done? Please take a look at our How-To: Link to How ToAs with the TA2024 We’ve also thought about thermal management, you are probably using the boomcase, boombox or boominator in the summer. Most amplifiers can get quite hot when completely inclosed in a boombox. With the MaxAmp, we have made good use of the thermal pad. The whole circuit board acts like a heatsink, to cool the amplifier. For this we have chosen to use twice the normal copper thickness, for even better cooling. Even at high tempertures the MaxAmp still keeps playing. If, the situtation may occur that the amplifier gets too hot, the thermal protection inside will shut down your amplifier to prevent permanent damage. Adding a volume control can be easily done by connecting it the supplied cable JST-PH cable, a linear potentiometer 10k ohms is sufficient. This means that you no longer need complicated stereo logarithmic potentiometers in the signal path. The amplifier will use the internal volume control. – For more information go to www.maxamp.nl This Maxamp with JST-PH connector is suitable for when the amplifier is integrated in your build. You can use the included cable to connect the signal on the outside of your boomcase, boombox or boominator. We recommend to use a 3.5mm jack socket which need to be soldered on the JST-PH cable and mount it on the outside of your boombox, boomcase or boominator. This 3.5mm socket connector is the same as the ones you will find on MP3 player or phone and is very easy to use. You are able to order an 3.5mm socket soldered on cable JST from us or just create one by yourself!

Out of stock

SKU: maxamp20 Categories: , ,

Additional information

Weight 0.08 kg

Reviews

There are no reviews yet.

Be the first to review “Maxamp 20”

Your email address will not be published. Required fields are marked *